Remote Transmitter

Cycle ignition key 8 times within 10 seconds and end in RUN position to enter program mode. Doors should lock and unlock to confirm program mode has been entered. Press any button on transmitter(s). Doors will lock, then unlock to confirm being programmed. If equipped with memory seats/mirrors or pedals (Navigator), ensure transmitter(s) are programmed in order according to numbers on back of transmitter(s). If doors do not respond, press button again (3 times maximum) with same transmitter. Turn ignition off. All doors should lock, then unlock. Check operation. Turn ignition off or wait 5 minutes for system to exit program mode. If doors still won't lock, go to SYSTEM TESTS  . Repeat procedure for additional transmitters (4 maximum).