Power Vent Window Switch
Remove suspect vent window switch. Check continuity between appropriate switch terminals with switch in appropriate position. See VENT WINDOW SWITCH TESTING table. See Figure . Continuity should exist between vent window switch terminals No. 5 and 7 (switch illumination circuit) at all times. If continuity is not as specified, replace switch.
VENT WINDOW SWITCH TESTING
| Switch Position | Continuity Between Terminals No. |
|---|---|
| Rest | 1 & 6; 2 & 3 |
| Close | 3 & 4; 1 & 6 |
| Open | 4 & 6; 2 & 3 |