Anti-Theft Systems - Passive DTCS
INSTRUMENT CLUSTER MODULE (ICM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Perform Test |
|---|---|---|
| B1213 If DTCs B1232, B1600, B1601, B1602 OR B1681 are also present, service these DTCs first, then recheck codes. |
Anti-Theft Number Of Programmed Keys Is Below Minimum | D |
| B1342 | ECU Defective | Using NGS tester, retrieve and document all continuous DTCs, clear DTCs. Perform Instrument Cluster Module (ICM) self-test. If DTC B1342 is retrieved again, replace ICM. See INSTRUMENT CLUSTER MODULE . |
| B1600 If DTCs B1232, B1600, B1601, B1602 OR B1681 are also present, service these DTCs first, then recheck codes. |
Passive Anti-Theft System Ignition Key Transponder Signal Is Not Received | G |
| B1601 If DTCs B1232, B1600, B1601, B1602 OR B1681 are also present, service these DTCs first, then recheck codes. |
Incorrect Key Code From Ignition Key Transponder | H |
| B1602 If DTCs B1232, B1600, B1601, B1602 OR B1681 are also present, service these DTCs first, then recheck codes. |
Invalid Key Code Format From Ignition Key Transponder | I |
| B1681 If DTCs B1232, B1600, B1601, B1602 OR B1681 are also present, service these DTCs first, then recheck codes. |
Transceiver Module Signal Not Received | J |
| B2103 | PATS Antenna Not Connected | K |
| B2139 | Data Mismatch | E |
| B2141 | NVM Configuration Failure | F |
| B2162 | Data Mismatch #2 | E |
| B2431 | Transponder Programming Failed | G |