Power Vent Window Switch
Remove suspect vent window switch. Check continuity between appropriate switch terminals with switch in appropriate position. See VENT WINDOW SWITCH TESTING table. See Figure. Continuity should exist between vent window switch terminals No. 5 and 7 (switch illumination circuit) at all times. If continuity is not as specified, replace switch.
VENT WINDOW SWITCH TESTING
| Switch Position | Continuity Between Terminals No. |
|---|---|
| Neutral | 1 & 6; 2 & 3 |
| Open | 3 & 4; 1 & 6 |
| Close | 4 & 6; 2 & 3 |