Anti-Lock Brake Control System
- Specifications
- Description And Operation
- Diagnosis And Testing
- Anti-Lock Control-Anti-Wheelspin Control
- Notes
- Inspection and Verification
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: DTC C1300 - Abs Hydraulic Pump Motor Circuit Failure
- Pinpoint Test B: DTC C1145 (RF), DTC C1155 (LF), DTC C1165 (RR), DTC C1175 (LR) - Anti-Lock Brake Sensor Input Circuit Failure
- Pinpoint Test C: DTC C1296 (LF), DTC C1297 (RF), DTC C1298 (RR), DTC C1299 (LR) - Anti-Lock Brake Sensor Input Signal Missing
- Pinpoint Test D: DTC B1484 - Brake Pedal Input Open Circuit
- Pinpoint Test E: DTC B1676 - Battery Voltage Out Of Range
- Pinpoint Test F: No Communication With The Module-Anti-Lock Brake Control Module
- Pinpoint Test I: The Traction Control Cannot Be Disabled/Is Inoperative
- Pinpoint Test K: The Yellow Abs Warning Indicator And Traction Control Active Indicator Always On
- Pinpoint Test L: No Communication With The Module - Hybrid Electronic Cluster (HEC)
- Anti-Lock Control-Anti-Wheelspin Control
- Removal And Installation