Torque Converter One-Way Clutch Check

Fig 1: Identifying Special Tools

Courtesy of FORD MOTOR CO.

Insert the special tool in one of the grooves in the stator thrust washer.

Fig 2: Inserting Special Tool Into Stator Thrust Washer Groove
Courtesy of FORD MOTOR CO.
Install the special tool in the converter pump drive.

Fig 3: Installing Special Tool In Converter Pump Drive
Courtesy of FORD MOTOR CO.
Using a torque wrench, turn the special tool counterclockwise while holding the special tool stationary.
- The converter one-way clutch should lock up and hold the specified torque.
- The torque converter one-way clutch should rotate freely in the clockwise direction.
- Try the clutch for lockup and hold in at least five positions.
- If the clutch fails to lock up and hold the specified torque, install a new or remanufactured torque converter.
  
  Fig 4: Turning Special Tool Counterclockwise
  Courtesy of FORD MOTOR CO.