General Specifications

Identifying General Specifications (1 Of 2)

Item

Specification

Fluid ⁽¹⁾

Motorcraft MERCON® Multipurpose (ATF) Transmission Fluid XT-2-QDX

MERCON®

Fluid Capacities ⁽²⁾

4R100 4x2

15.0L (15.9 Quarts) Approximately Dry Fill Capacity

4R100 4x4

15.5L (15.9 Quarts) Approximately Dry Fill Capacity

Fluid Filter

Inline Transmission Fluid Filter Kit

XC3Z-7B155-AA

Inline Transmission Fluid Filter

XC3Z-7B155-BA

Lubricants

CAUTION:

⁽¹⁾	Using a transmission fluid that indicates a dual usage MERCON® and MERCON®V in a transmission application requiring MERCON®, may cause transmission damage. Use of any fluid other than the recommended fluid may cause transmission damage.

NOTE: Refer to the transmission fluid level indicator and the Owner's Guide for the type of transmission fluid required. Some fluid labels may indicate dual usage such as MERCON® and MERCON®V. These dual-usage fluids are not to be used in transmissions that use only the MERCON® type fluid. These dual-usage fluids may be used in transmissions that require MERCON®V use.

⁽²⁾

The fluid capacities are approximate dry fill capacity and include fluid coolers and fluid cooler tubes. Fluid level indicator should be used to determine actual fluid requirement and fluid specifications. Check level at operating temperature. DO NOT OVERFILL. The transmission fluid should be changed every 30,000 miles (48,000 km) regardless of normal or special operating conditions.

General Specifications (2 Of 2)

Item	Specification
Silicone Brake Caliper Grease and Dielectric Compound D7AZ-19A331-A (Motorcraft WA-10)	ESE-M1C171-A
Multi-Purpose Grease D0AZ-19584-AA	ESB-M1C93-B