Fluid
- These dual-usage fluids are not to be used in transmissions that use only the MERCON® type fluid. These dual-usage fluids may be used in transmissions that require MERCON V® use.
- Use of any fluid other than the recommended fluid may cause transmission damage.
- Refer to the transmission fluid level indicator and the Owner's Guide for the correct type of transmission fluid required. Some fluid labels may indicate dual usage such as MERCON® and MERCON V®.
- Using a transmission fluid that indicates a dual usage MERCON® and MERCON V® in a transmission application requiring MERCON®, may cause transmission damage.
|
| Motorcraft MERCON® Multipurpose (ATF) Transmission Fluid XT-2-QDX |
MERCON® |
Fluid Capacities
- The fluid capacities are approximate dry fill capacity and include fluid coolers and fluid cooler tubes.
- Fluid level indicator should be used to determine actual fluid requirement and fluid specifications.
- Check level at operating temperature. DO NOT OVERFILL.
- The transmission fluid and the in-line filter should be changed every 30,000 miles (48,000 km) regardless of normal or special operating conditions.
|
| 4R100 4x2 |
15.0L (15.9 Quarts) Approximately Dry Fill Capacity |
| 4R100 4x4 |
15.5L (15.9 Quarts) Approximately Dry Fill Capacity |
| Transmission Fluid In-Line Filter |
| Transmission Fluid In-Line Filter Kit |
XC3Z-7B155-AA |
| Transmission Fluid In-Line Filter |
XC3Z-7B155-BA |
| Lubricants |
| Silicone Brake Caliper Grease and Dielectric Compound D7AZ-19A331-A (Motorcraft WA-10) |
ESE-M1C171-A |
| Multi-Purpose Grease D0AZ-19584-AA |
ESB-M1C93-B |