- Shift interlock system does not release/lock correctly
|
- Shift interlock switch.
- Circuit(s).
- Fuse(s).
- Shift lock actuator.
- Brake pedal position (BPP) switch.
|
|
- Shift control out of correct gear relationship
|
- Transmission shift cable and bracket.
- Retainer bracket.
- Shift control linkage.
|
|
- Transmission range indicator does not correspond to the gear
|
- Transmission shift cable bracket.
- Transmission control indicator linkage.
- Transmission shift cable loose from the transmission retainer bracket.
- Shift linkage.
|
|
- Transmission range indicator lamp does not illuminate
|
|
|
- Transmission control switch (TCS) is not operating correctly
|
- Fuse.
- TCS not cycled during self test.
- Powertrain control module (PCM).
- Circuit(s).
|
|
- Transmission control indicator lamp (TCIL) does not illuminate
|
- Bulb.
- Circuit(s).
- Powertrain control module (PCM).
|
|
- Transmission control indicator lamp (TCIL) stays illuminated
|
- Circuit(s).
- Powertrain control module (PCM).
|
|
- Water enters inside the vehicle
|
- Cable assembly grommet.
- Torn cable assembly grommet.
|
- SECURE grommet to dash panel.
- INSTALL new transmission shift cable.
|
|
|
- Transmission shift cable.
- Cable bracket.
|
- INSTALL a new transmission shift cable.
- ADJUST cable. TIGHTEN cable bracket screws.
|
- Transmission range selector lever will not shift from range
|
- Transmission shift cable.
- Lock tab.
- Broken transmission shift cable.
|
- REINSTALL transmission shift cable.
- REPAIR or INSTALL a new lock tab.
- INSTALL a new transmission shift cable.
|