LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2006 >> LS >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamic Systems >> Removal And Installation >> Anti-Lock Brake System (ABS) Module >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

  1. Position the battery junction box (BJB) aside.
    1. Release the clips.
    2. Position the BJB aside.
      Fig 1: Identifying Battery Junction Box (BJB) And Clips
      G04690091Courtesy of FORD MOTOR CO.
  2. Disconnect the ABS electrical connector.
  3. Remove the 3 ABS module screws and the ABS module.
    • To install, tighten to 2 Nm (18 lb-in).
    4. NOTE: Use the diagnostic tool to configure the ABS module. For additional information, refer to MODULE CONFIGURATION .
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals