LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2006 >> LS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedure >> Cylinder Block Core Plug Replacement >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cylinder Block Core Plug Replacement: Notes

SPECIAL TOOL(S)

G04690219Courtesy of FORD MOTOR CO.
 Slide Hammer
100-001 (T50T-100-A)
MATERIAL SPECIFICATION

Item Specification
Threadlock 262 TA-26 WSK-M2G351-A6
  1. Use a slide hammer or tools suitable to remove the cylinder block core plug.
    Fig 1: Removing Cylinder Block Core Plug Using Slide Hammer
    G03885062Courtesy of FORD MOTOR CO.
  2. Inspect the cylinder block plug bore for any damage that would interfere with the correct sealing of the plug. If the cylinder block plug bore is damaged, bore for the next oversize plug.
    3. NOTE: Oversize plugs are identified by the OS stamped in the flat located on the cup side of the plug.
  3. Coat the cylinder block core plug and bore lightly with Threadlock 262 and install the cylinder block core plug.
scientia non olet · About LEMON Manuals