LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2006 >> LS >> Repair and Diagnosis >> Engine Performance >> Engine Ignition System >> Removal And Installation >> Ignition Coil-On-Plug >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Coil-On-Plug: Removal

    LH ignition coils 

  1. Remove the evaporative emissions (EVAP) canister purge valve nuts and position the valve and bracket aside.

    2. All ignition coils 

  2. Remove the 12 bolts and the 2 ignition coil covers.
  3. Remove all silicone sealant and residue from the coil cover.
    Fig 1: Locating Silicone Sealant And Residue
    G04691037Courtesy of FORD MOTOR CO.
  4. Remove all silicone sealant and residue from the valve cover surface and ignition coil wiring harness.
    Fig 2: Locating Ignition Coil Wiring Harness
    G04691038Courtesy of FORD MOTOR CO.
  5. Disconnect the 8 ignition coil electrical connectors.
  6. Remove the 8 ignition coil bolts.
    7. NOTE: When removing the ignition coils, a slight twisting motion will break the seal and ease removal.
  7. Remove the 8 ignition coils.
scientia non olet · About LEMON Manuals