Powertrain Control Module (PCM): Removal
- Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION .
- Remove the fresh air inlet duct. For additional information, refer to CLIMATE CONTROL .
- Remove the glove compartment.
- Disconnect the 3 PCM electrical connectors.
- Remove the 2 PCM nuts.
- Remove the 2 PCM bracket bolts.
- Remove the PCM and bracket as an assembly through the glove compartment opening.
NOTE:
PCM replacement DOES NOT require new keys or programming of keys.