Anti-Theft Systems DTCS (Pats)
INSTRUMENT CLUSTER DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Source | Action |
|---|---|---|---|
| B1213 | Anti-Theft Number of Programmed Keys is Below Minimum | Instrument Cluster | Go To PINPOINT TEST C . |
| B1342 | ECU is Defective | Instrument Cluster | CLEAR the DTCs. CARRY OUT the instrument cluster self-test. If DTC B1342 is retrieved, INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . |
| B1600 | PATS Key Transponder Signal is Not Received - Damaged Key or Non-PATS Key | Instrument Cluster | Go To PINPOINT TEST F . |
| B1601 | PATS Received Incorrect Key-Code From Ignition Key Transponder (Unprogrammed PATS Key) | Instrument Cluster | Go To PINPOINT TEST G . |
| B1602 | PATS Received Invalid Format of Key-Code From Ignition Key Transponder (Partial Key Read) | Instrument Cluster | Go To PINPOINT TEST H . |
| B1681 | PATS Transceiver Module Signal is Not Received (Damaged, Not Connected, or Damaged Wiring) | Instrument Cluster | Go To PINPOINT TEST I . |
| B2103 | Antenna Not Connected - Defective Transceiver | Instrument Cluster | Go To PINPOINT TEST J . |
| B2139 | Data Mismatch | Instrument Cluster | Go To PINPOINT TEST D . |
| B2141 | NVM Memory Failure | Instrument Cluster | Go To PINPOINT TEST E . |
| B2431 | Transponder Programming Failed | Instrument Cluster | Go To PINPOINT TEST F . |
| B2477 | Module Configuration Failure | Instrument Cluster | REFER to MODULE CONFIGURATION . |
| U1147 | SCP (J1850) Invalid or Missing Data for Vehicle Security | Instrument Cluster/Powertrain Control Module (PCM) | Go To PINPOINT TEST D . |
| U1262 | SCP Communications BUS Fault | Instrument Cluster/PCM | REFER to MODULE COMMUNICATIONS NETWORK . |