- The shift interlock system does not release or lock correctly
|
- Circuitry
- Front electrical module (FEM)
- CJB Fuse 204 (5A) and 205 (5A)
- Shift lock actuator
- Brake pedal position (BPP) switch
|
|
- The shift control is out of correct gear relationship with bezel
|
- Transmission shift cable and bracket
- Transmission control shifter
|
|
- Transmission range indicator does not correspond to the gear position display on instrument cluster
|
- Transmission shift cable bracket
|
- TIGHTEN the bolts holding the transmission shift cable bracket.
|
- Transmission shift cable loose from the transmission shift cable bracket
|
|
|
|
|
- Digital transmission range (TR) sensor
|
|
|
|
- INSTALL a new shifter assembly.
|
- Unable to cancel overdrive
|
- Digital transmission range (TR) sensor (SST only)
- Fuse
- TCS (base shifter only)
- TCS not cycled during self-test
- Powertrain control module (PCM)
- Circuitry
|
|
- Transmission does not shift in manual mode (SST only)
|
- Fuse
- SST (+/- switches)
- SST (+/-) not cycled during self - test
- PCM
- Circuitry
|
|
- Instrument panel does not indicate park
|
- Park sense switch
- Circuitry
|
|
- Rattle, buzz or other noise
|
|
- INSTALL a new selector lever knob.
|
|
|
- INSTALL a new selector lever bezel.
|
|
|
|
|
|
|
- INSTALL a new transmission shift cable.
|
|
|
|
|
|
- INSTALL new shifter assembly.
|
- Transmission range shifter will not move
|
|
- INSTALL new transmission shift cable.
|
|
|
|
|
|
- INSTALL a new transmission shift cable.
|
- Brake shift interlock system
|
|
- Transmission shifter assembly
|
- INSTALL new shifter assembly.
|