LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2006 >> LS >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle-Transmission >> Disassembly And Assembly Of Subassemblies >> Overdrive Planetary and One-Way Clutch Assembly >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Overdrive Planetary and One-Way Clutch Assembly: Disassembly

    NOTE: The overdrive one-way clutch is serviced with the center shaft assembly.
  1. Remove the center shaft from the overdrive ring gear.
    1. Remove the overdrive center shaft retaining ring.
    2. While rotating counterclockwise remove the center shaft from the ring gear.
      Fig 1: Identifying Overdrive Center Shaft Retaining Ring And Center Shaft From Ring Gear
      G04691526Courtesy of FORD MOTOR CO.
    2. CAUTION: Do not remove the overdrive one-way clutch. Damage to the clutch may occur if it is removed.
  2. Clean and inspect the overdrive one-way clutch and center shaft.
    • Inspect for cracks in the roller cage and wear on the roller clutch, and the press fit of the one-way clutch to the center shaft.
      Fig 2: Locating Roller Cage
      G04691527Courtesy of FORD MOTOR CO.
  3. Inspect the one-way clutch.
    • Temporarily insert the overdrive planetary gear carrier assembly into the one-way clutch rollers for verification of the one-way clutch.
    • The planetary gear must rotate counterclockwise and hold when rotated clockwise.
    • Remove the planetary gear carrier assembly.
      Fig 3: Locating Planetary Gear Carrier Assembly
      G04691528Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals