LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2006 >> LS >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle-Transmission >> In-Vehicle Repair >> Transmission Support Insulator >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
  2. Support the transmission with a transmission jack.
  3. Remove the rear transmission crossmember-to-floor pan screws.
    • To install, tighten to 63 Nm (46 lb-ft).
  4. Remove the transmission insulator-to-extension housing center screws.
    • To install, tighten to 48 Nm (35 lb-ft).
  5. Remove the rear transmission crossmember.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals