Starting System DTCS
PASSIVE ANTI-THEFT SYSTEM (PATS) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Source | Action |
|---|---|---|---|
| B1213 | Anti-Theft Number of Programmed Keys is Below Minimum | Powertrain control module (PCM) | REFER to ANTI-THEFT - PATS . |
| B1232 | Transceiver Module Antenna Failure. Memory Failure in The PCM. | PCM | REFER to ANTI-THEFT - PATS . |
| B1342 | ECU is Defective | PCM | CLEAR the DTCs. REPEAT the self-test. If DTC B1342 is retrieved again, INSTALL a powertrain control module (PCM). REFER to ELECTRONIC ENGINE CONTROLS - 2.3L or ELECTRONIC ENGINE CONTROLS - 3.0L (4V) . CLEAR the DTCs. REPEAT the self-test. |
| B1600 | Passive Anti-Theft System (PATS) Key Transponder is Not Received | PCM | REFER to ANTI-THEFT - PATS . |
| B1601 | PATS Received Incorrect Key-Code From Key Transponder | PCM | REFER to ANTI-THEFT - PATS . |
| B1602 | PATS Received Invalid Format of Key-Code From Key Transponder | PCM | REFER to ANTI-THEFT - PATS . |
| B1681 | PATS Transceiver Module Signal is Not Received | PCM | REFER to ANTI-THEFT - PATS . |
| B2103 | Antenna Not Connected | PCM | REFER to ANTI-THEFT - PATS . |
| B2431 | Key Program Failure (Defective Key or Transceiver) | PCM | VERIFY if the correct PATS key is being used. If the PATS key is defective, USE a new key for programming. |