DTC Index: Seats

DRIVER DOOR MODULE (DDM) DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC	Description	Action
B1342	ECU is Faulted	CLEAR the DTCs. REPEAT the self-test. If DTC B1342 is retrieved again, INSTALL a new DSM. REFER to DRIVER SEAT MODULE (DSM) . TEST the system for normal operation.
B1534	Memory 1 Switch Circuit Short to Ground	GO to PINPOINT TEST G .
B1538	Memory 2 Switch Circuit Short to Ground	GO to PINPOINT TEST G .
B2477	Module Configuration Failure	NOTE: This DTC indicates PMI has not been done to a newly installed module or configuration data has been lost. Presence of this DTC alone does not prevent basic seat operation from the seat control switch. CARRY OUT Programmable Module Installation (PMI) on the DDM. REFER to MODULE CONFIGURATION SYSTEM article. REPEAT the self-test. If PMI is successful, the DTC will not be present.
U0140	Lost Communication With Body Control Module (GEM)	NOTE: The SJB may also be identified as the GEM. CLEAR the DTC. REPEAT the self-test. If the DTC is retrieved again, REFER to MODULE COMMUNICATIONS NETWORK article to diagnose the MS-CAN concern.
U2050	No Application Present	INSTALL a new DDM. REFER to HANDLES, LOCKS, LATCHES AND ENTRY SYSTEMS article. REPEAT the self-test.
All Other DTCs	-	REFER to HANDLES, LOCKS, LATCHES AND ENTRY SYSTEMS article.