Module Communication Network - Module Configuration DTCS
MODULE COMMUNICATION NETWORK - MODULE CONFIGURATION DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Source | Action |
|---|---|---|---|
| B2477 | Module Configuration Failure |
|
Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information. |
| B2477 | Module Configuration Failure |
|
Carry out APIM programming. Refer to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING in this information. |
| B2477 | Module Configuration Failure | PAM - Navigator | INSTALL a new PAM . Refer to PARKING AID . |
| B2477 Module | Configuration Failure |
|
INSTALL a new VDM . Refer to VEHICLE DYNAMIC SUSPENSION . |
| B2900 | Vehicle Identification Number (VIN) mismatch |
|
Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information. |
| P0602 | Powertrain Control Module Programming Error |
|
Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information. |
| P0605 | Internal Control Module Read Only Memory (ROM ) Error |
|
Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information. |
| P0605 | Internal Control Module Read Only Memory (ROM ) Error |
|
INSTALL a new TCM . Refer to AUTOMATIC TRANSMISSION - 6R80 . |
| P1639 | Vehicle ID Block Corrupted, Not Programmed |
|
Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information. |
| U0300 | Internal Control Module Software Incompatibility |
|
Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information. |
| U201A:51 | Control Module Main Calibration Data: Missing Calibration |
|
Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information. |
| U2050 | No Application Present |
|
Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information. |
| U2050 | No Application Present | 4X4 control module | INSTALL a new 4X4 control module. Refer to FOUR WHEEL DRIVE (4WD) SYSTEMS . |
| U2050 | No Application Present |
|
Carry out APIM programming. Refer to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING in this information. |
| U2050 | No Application Present |
|
INSTALL a new HVAC module. Refer to CLIMATE CONTROL . |
| U2050 | No Application Present |
|
INSTALL a new LTM . Refer to BODY PANEL SYSTEM - BODY CLOSURES . |
| U2050 | No Application Present |
|
INSTALL a new PRB module. Refer to EXTERIOR TRIM & ORNAMENTATION . |
| U2050 | No Application Present |
|
INSTALL a new VDM . Refer to VEHICLE DYNAMIC SUSPENSION . |
| U2051 | One or More Calibration Files Missing/Corrupt |
|
Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information. |
| U2051 | One or More Calibration Files Missing/Corrupt |
|
INSTALL a new LTM . Refer to BODY PANEL SYSTEM - BODY CLOSURES . |
| U2051 | One or More Calibration Files Missing/Corrupt |
|
INSTALL a new PAM . Refer to PARKING AID . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information |
|
Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information. |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information |
|
Carry out APIM programming. Refer to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING in this information. |
| U2101:00 | Initial Configuration Incompatible: No Sub Type Information |
|
Carry out APIM programming. Refer to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING in this information. |