Active Park Assist DTCS
PARKING AID MODULE (PAM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B129C:12 | Left Front Side Sensor: Circuit Short To Battery | GO to Pinpoint Test C . |
| B129C:14 | Left Front Side Sensor: Circuit Short To Ground Or Open | GO to Pinpoint Test B . |
| B129C:96 | Left Front Side Sensor: Component Internal Failure | GO to Pinpoint Test D . |
| B129D:12 | Right Front Side Sensor: Circuit Short To Battery | GO to Pinpoint Test C . |
| B129D:14 | Right Front Side Sensor: Circuit Short To Ground Or Open | GO to Pinpoint Test B . |
| B129D:96 | Right Front Side Sensor: Component Internal Failure | GO to Pinpoint Test D . |
| B1303:11 | Park Assist Switch: Circuit Short To Ground | GO to Pinpoint Test E . |
| B1304:68 | Electronic Power Assisted Steering System: Event Information | GO to Pinpoint Test F . |
| U0100:00 | Lost Communication With ECM/PCM "A": No Sub Type Information | GO to Pinpoint Test H . |
| U0121:00 | Lost Communication With Anti-Lock Brake System (ABS) Control Module: No Sub Type Information | GO to Pinpoint Test I . |
| U0131:00 | Lost Communication With Power Steering Control Module: No Sub Type Information | GO to Pinpoint Test J . |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test K . |
| U0401:00 | Invalid Data Received From ECM/PCM A: No Sub Type Information | This DTC sets when the Parking Aid Module (PAM) receives invalid network data from the PCM with a faulted signal data input. RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. REFER to MULTIFUNCTION ELECTRONIC MODULES for a list of all DTCs. |
| U0415:00 | Invalid Data Received From Anti-Lock Brake System (ABS) Control Module: No Sub Type Information | This DTC sets when the PAM receives invalid network data from the ABS module with a faulted signal data input. RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. REFER to MULTIFUNCTION ELECTRONIC MODULES for a list of all DTCs. |
| U0420:00 | Invalid Data Received From Power Steering Control Module: No Sub Type Information | This DTC sets when the PAM receives invalid network data from the Power Steering Control Module (PSCM) with a faulted signal data input. RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. REFER to MULTIFUNCTION ELECTRONIC MODULES for a list of all DTCs. |
| U0423:00 | Invalid Data Received From Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | This DTC sets when the PAM receives invalid network data from the Instrument Panel Cluster (IPC) with a faulted signal data input. RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. REFER to MULTIFUNCTION ELECTRONIC MODULES for a list of all DTCs. |
| U2024:41 | Control Module Cal-Config Data: General Checksum Failure | CLEAR the DTCs. REPEAT the PAM self-test. If DTC U2024:41 is retrieved again, CARRY OUT Programmable Module Installation (PMI). REFER to MODULE CONFIGURATION . REPEAT the self-test. If DTC U2024:41 is retrieved again, INSTALL a new PAM. REFER to PARKING AID . CLEAR all DTCs. REPEAT the self-test. |
| All other DTCs | - | REFER to PARKING AID . |