Brake Shift Interlock Override

NOTE: If it is necessary to use the override procedure to move the selector lever out of the PARK position, it is possible that a fuse has blown. GO to PINPOINT TEST A .
This vehicle is equipped with a brake shift interlock feature that prevents the selector lever from being moved out of PARK when the ignition is in the ON position unless the brake pedal is pressed.
If the selector lever cannot be moved out of the PARK position when the ignition is in the ON position and the brake pedal is pressed:

Apply the parking brake and remove the ignition key.
Remove the selector lever bezel. For additional information, refer to SELECTOR LEVER BEZEL .

NOTE: Selector lever in DRIVE position for clarity.

Position the selector lever in NEUTRAL.
- Using a suitable tool, push the brake shift interlock override mechanism on the selector lever forward.
- Apply the brake.
- Press the button on the selector lever and position the selector lever in NEUTRAL.
  
  Fig 1: Pushing Brake Shift Interlock Override Mechanism
  Courtesy of FORD MOTOR CO.
To install, reverse the procedure.
Start the vehicle.