Starting System: Specifications
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Ground wire nut (2.0L Gasoline Turbocharged Direct Injection (GTDI)) | 18 | - | 159 |
| Starter motor bolt (3.5L & 3.7L) | 48 | 35 | - |
| Starter motor solenoid battery cable nut | 12 | - | 106 |
| Starter motor solenoid wire nut | 5 | - | 44 |
| Starter motor stud bolts (2.0L GTDI) | 48 | 35 | - |
| Starter motor stud bolt (3.5L & 3.7L) | 48 | 35 | - |
| Transmission manual control lever nut | 18 | - | 159 |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Normal engine cranking speed | 200-250 rpm |
| Starting circuit maximum voltage drop (Engine at normal operating temperature) | 0.5 volt |
| Starter motor maximum load current draw | 800 amps |
| Starter motor no-load current draw | 60-80 amps |
| Starter motor normal load current draw | 130-190 amps |