LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2015 >> MKX AWD >> Repair and Diagnosis >> Quick Lookups >> DTC Index >> Module COMMMUNICATIONS Network DTCS
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module COMMMUNICATIONS Network DTCS

DTC INDEX

DTC Description Source Action
U0001:88 High Speed Controller Area Network (HS-CAN) Communication Bus; Bus Off ABS module
C-CM		 The module could not communicate on the network at a point in time. The fault is not currently present (the module had to communicate with the scan tool to report this DTC). CLEAR the DTC. REPEAT the Network Test with the scan tool. VERIFY the integrity of the connectors and wiring Refer to Module Communications Network , for schematic and connector information.
U0028:08 Vehicle Communication Bus A: Bus Signal/Message Failures RCM The module could not communicate on the network at a point in time. The fault is not currently present (the module had to communicate with the scan tool to report this DTC). CLEAR the DTC. REPEAT the Network Test with the scan tool. VERIFY the integrity of the connectors and wiring Refer to Module Communications Network , for schematic and connector information.
U0028:88 Vehicle Communication Bus A: Bus Off RCM The module could not communicate on the network at a point in time. The fault is not currently present (the module had to communicate with the scan tool to report this DTC). CLEAR the DTC. REPEAT the Network Test with the scan tool. VERIFY the integrity of the connectors and wiring Refer to Module Communications Network , for schematic and connector information.
U0073 Control Module Communication Bus A Off HCM The module could not communicate on the network at a point in time. The fault is not currently present (the module had to communicate with the scan tool to report this DTC). CLEAR the DTC. REPEAT the Network Test with the scan tool. VERIFY the integrity of the connectors and wiring Refer to Module Communications Network , for schematic and connector information.
U0073:00 Control Module Communication Bus A Off TCM The module could not communicate on the network at a point in time. The fault is not currently present (the module had to communicate with the scan tool to report this DTC). CLEAR the DTC. REPEAT the Network Test with the scan tool. VERIFY the integrity of the connectors and wiring Refer to Module Communications Network , for schematic and connector information.
U3000:88 Control Module: Bus Off APIM The module could not communicate on the network at a point in time. The fault is not currently present (the module had to communicate with the scan tool to report this DTC). CLEAR the DTC. REPEAT the Network Test with the scan tool. VERIFY the integrity of the connectors and wiring Refer to Module Communications Network , for schematic and connector information.
scientia non olet · About LEMON Manuals