Body Control Module (BCM)
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B115E:01 | Camera Module: General Electrical Failure | DTC B115E:01 sets in the BCM when the video camera status indicates corrupted data with in the video camera. CLEAR the DTCs. REPEAT the self-test. If DTC B115E:01 is retrieved again, INSTALL a new video camera. REFER to Video Camera . TEST the system for normal operation. |
| B115E:08 | Camera Module: Bus Signal/Message Failure | If the vehicle is equipped with a 8 in (203.2 mm) touchscreen, GO to Pinpoint Test G . If the vehicle is equipped with a 4.2 in (106.68 mm) touchscreen, GO to Pinpoint Test J . |
| B115E:49 | Camera Module: Internal Electronic Failure | CLEAR the DTCs. REPEAT the self-test. If DTC B115E:49 is retrieved again, INSTALL a new video camera. REFER to Video Camera . TEST the system for normal operation. |
| B115E:55 | Camera Module: Not Configured | DTC B115E:55 sets in the BCM when the video camera is not configured. The video camera needs to be configured through the BCM. CARRY OUT the rear video camera configuration using the scan tool. TEST the system for normal operation. |
| All other DTCs | - | REFER to the Diagnostic Trouble Code (DTC) Charts in Multifunction Electronic Modules . |