LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2016 >> MKS Base, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission External Controls >> Removal And Installation >> Selector Lever >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever: Installation

  1. 1.

    • Tighten to 10 Nm (89 lb-in).
GFD88856Courtesy of FORD MOTOR COMPANY

  1. 2.

GFD88855Courtesy of FORD MOTOR COMPANY

  1. 3.

    NOTE: When installing the selector lever cable, make sure that the selector lever cable locking tabs are locked in place. Press the selector lever cable into the selector lever housing and listen for the selector lever cable retainer to click in place. Pull back on the selector lever cable to make sure that the selector lever is locked into the selector lever housing.
GFD88854Courtesy of FORD MOTOR COMPANY

  1. 4.

GFD88857Courtesy of FORD MOTOR COMPANY

  1. 5.

    Install the selector lever bezel. Refer to Selector Lever Bezel .

  1. 6.

    Adjust the selector lever cable when a new selector lever is installed. Refer to Selector Lever Cable Adjustment .
scientia non olet · About LEMON Manuals