April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever Cable Adjustment - 6F35

1.

Remove the ACL assembly. For additional information, refer to Intake Air Distribution and Filtering .

2.

GFD94091

Courtesy of FORD MOTOR COMPANY

3.

GFD94085

Courtesy of FORD MOTOR COMPANY

4.
1. 1.
  
  Rotate the manual control lever clockwise until it stops.
1. 2.
  
  Rotate the manual control lever counterclockwise one detent.

GFD94092

Courtesy of FORD MOTOR COMPANY

5.
1. 1.
  
  Carefully pry outward the adjuster lock tabs.
1. 2.
  
  While holding the adjuster lock tabs outward, slide the lock to unlock the selector lever cable.

GFD94093

Courtesy of FORD MOTOR COMPANY

6.

NOTE: To prevent selector lever cable damage, do not apply force to the selector lever cable between the manual control lever and the selector lever cable bracket.

NOTE: Make sure that the selector lever cable end is correctly installed onto the manual control lever ball stud by pulling back on the selector lever cable end.

GFD94094

Courtesy of FORD MOTOR COMPANY

7.

NOTE: After locking the adjuster, pull back on the adjuster to make sure it is securely installed.

GFD94095

Courtesy of FORD MOTOR COMPANY

8.

Install the ACL assembly. For additional information, refer to Intake Air Distribution and Filtering .

9.

Verify that the vehicle starts in PARK and NEUTRAL only and that the reverse lamps illuminate in REVERSE.