Cylinder Head Temperature (CHT) Sensor - 3.5L GTDI

For information on Ford Color Coded Illustrations refer to OEM COLOR CODING

Fig 1: Exploded View Of Cylinder Head Temperature (CHT) Sensor With Torque Specifications (3.5L GTDI)

Courtesy of FORD MOTOR COMPANY

1. Remove the Air Cleaner(ACL) outlet pipe and the ACL. Refer to Intake Air Distribution and Filtering .
2. Position the RH turbocharger intake tube aside. Refer to Intake Air Distribution and Filtering .
3. Remove the ground wire-to-engine front cover bolt.
4. Disconnect the Cylinder Head Temperature(CHT) sensor electrical connector.
5. Remove and discard the CHT sensor.
   • To install, tighten to 10 Nm (89 lb-in).
6. To install, reverse the removal procedure.
   • Do not reuse the CHT sensor, install a new sensor.