Fuel Rail Pressure (FRP) Sensor - 2.0L GTDI: Installation
- Tighten in 5 stages.
- Stage 1: Tighten to 6 Nm (53 lb-in).
- Stage 2: Tighten an additional 5 degrees.
- Stage 3: Loosen 90 degrees.
- Stage 4: Tighten to 6 Nm (53 lb-in).
- Stage 5: Tighten an additional 21 degrees.
- Install the CAC inlet pipe. Refer to Intake Air Distribution and Filtering .
- Connect the battery ground cable. Refer to Battery, Mounting and Cables .