Throttle Position (TP) Sensor 3.5L GTDI: Installation

NOTE: When installing the new TP sensor, make sure that the radial locator tab on the TP sensor is aligned with the radial locator hole on the ETB.

NOTE: Do not use power tools.

Install the new TP sensor.
- Using hand tools, install the 2 new bolts.
  - Tighten to 3 Nm (27 lb-in).
Courtesy of FORD MOTOR COMPANY
Connect the TP sensor electrical connector.

Courtesy of FORD MOTOR COMPANY
Install the CAC outlet pipe. Refer to Intake Air Distribution and Filtering .