Steering Column Switches DTCS: BCM
NOTE:
Any push-button start system fault results in DTCs being stored in the Remote Function Actuator (RFA) module and BCM. Correct all RFA module DTCs prior to diagnosing the BCM DTCs listed below.
| DTC | Description | Action |
|---|---|---|
| B108A:01 | Start Button: General Electrical Failure | GO to Pinpoint Test D . |
| B1142:29 | Ignition Status 1: Signal Invalid | GO to Pinpoint Test D . |
| B1240:11 | Start Button Mode Indicator: Circuit Short to Ground | GO to Pinpoint Test C . |
| B1240:15 | Start Button Mode Indicator: Circuit Short to Battery or Open | GO to Pinpoint Test C . |
| B1310:12 | Run/Start Control: Circuit Short to Battery | GO to Pinpoint Test I . |
| B1310:14 | Run/Start Control: Circuit Short to Ground or Open | GO to Pinpoint Test A . |
| All other BCM DTCs | - | REFER to Multifunction Electronic Modules . |