Control Arm: Remove & Replace
DOES NOT include alignment.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Lower,Both | 2.0 | B | ||
| Lower,One Side | 1.1 | B | ||
| Upper,Both | 1.4 | B | ||
| Upper,One Side | 0.8 | B | ||
| Additional Procedure: CONTROL ARM: Remove & Replace: | ||||
| Add,w/Dynamic Suspension | 0.2 | B | ||
| Combination Procedure: BALL JOINT: Remove & Replace: | ||||
| Each | 0.3 | B | ||