LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2021 >> Navigator Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Module Configuration >> General Procedures >> Module Programming >> Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module Programming: Check

NOTE: Perform the following pre-checks to make sure module programming completes without errors.
  1. Start the programming session in KOEO.
  2. Make sure the vehicle battery is fully charged or is connected to a battery charger.
  3. NOTE: A good Internet connection is necessary.

    Inspect the VCM and cables for damage. Make sure cables remain connected throughout the programming procedure.

  4. Turn off all unnecessary accessories, such as radio, A/C, climate controlled seats, headlamps, interior and demand lamps.
  5. Disconnect any aftermarket accessories, such as remote start, security alarm and power inverter.
  6. For Plug-in hybrid and electric vehicles, disconnect the external charge cord from the charge port.
  7. Disable Microsoft Windows sleep mode, screen saver and hibernation modes.
scientia non olet · About LEMON Manuals