All Models
Turn front wheels to straight-ahead position and check toe-in measurement. Move vehicle ahead so front wheels rotate 180° and take second reading. Take average of two readings to check toe-in. If not within specifications, loosen lock nut for each tie rod and loosen clips securing rubber gaiters to tie rods. To adjust, rotate both tie rods equally to set toe-in to specifications.
NOTE:
Tie rods must be equal lengths.
Tighten lock nuts and clips on tie rods.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Caster (Degrees) | Camber (Degrees) | Toe-In (Inches) | Toe-Out On Turns (Degrees) | |
|---|---|---|---|---|---|
| Inner | Outer | ||||
| Midget | 3 | 3/4 | 0 to 1/8 | 18-21 | 20 |
| MGB | 6 1/8 ± 1 1/8 | 1/2 ± 3/4 | 1/16 to 3/32 | 18-20 | 20 |