LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1977 >> Cosmo Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Automatic Throttle Release System >> Testing >> Choke Switch & Full Choke Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Choke Switch & Full Choke Switch

  1. Warm engine to normal operating temperature. Disconnect water temperature switch. Disconnect carburetor choke heater lead at connector and connect voltmeter to choke heater lead (from control unit).
  2. Connect tachometer to engine. On California vehicles, current should flow to choke heater lead, when engine is started with choke knob out. Knob should return after 20-60 seconds from engine starting time.
  3. Connect jumper wire to both terminals of disconnected carburetor choke heater lead (from control unit). Set engine speed at 2000 RPM with choke knob. Current should flow to choke heater lead. Current should stop flowing when choke knob is completely pushed in.
scientia non olet · About LEMON Manuals