LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1978 >> Cosmo Standard Trans >> Repair and Diagnosis (Single Page) >> Suspension >> Wheel Alignment >> Wheel Alignment (Procedures) >> Adjustment >> Toe-In >> All Models
April 5, 2026: LEMON Manuals is launched! Read the announcement.

All Models

  1. Raise front of vehicle. Turn wheels by hand and mark a line in center of each tire tread. Place vehicle in straight-ahead position and lower vehicle to ground.
  2. Measure distance between marked lines at both front and rear of wheel. Make sure measurements are made equal distances from ground. Distance at rear of wheel should be.24" (6 mm) more than that at front wheels. Loosen lock nuts and turn tie rods until adjustment is correct.
scientia non olet · About LEMON Manuals