LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1982 >> GLC Custom, 2D Hatchback, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Slow Fuel Cut System >> Testing & Adjustment >> Accelerator Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Accelerator Switch

  1. Warm engine to normal operating temperature. Stop engine and disconnect electrical connector from switch (located on carburetor under thermostat housing). Connect ohmmeter to switch terminals.
  2. Depress accelerator pedal; continuity should exist. Fully release accelerator; no continuity should exist. If switch does not operate as outlined, adjust or replace accelerator switch.
  3. To adjust accelerator switch, warm engine to normal operating temperature and run at idle speed. Adjust idle if necessary. Completely loosen accelerator switch adjusting screw. Then gradually tighten adjusting screw until "clicking" sound is heard. Complete adjustment by turning adjusting screw an additional 1 1/4-1 1/2 turns and retest switch.
scientia non olet · About LEMON Manuals