Water THERMO Sensor
Remove water thermo sensor from the intake manifold. Sensor will have Blue/Red and Blue/Yellow wires attached. Place sensor in water with a thermometer and heat up water gradually. Check the calibration of the sensor according to the Water Thermo Sensor Calibration Table
WATER THERMO SENSOR CALIBRATION
| Resistance: Ohms | Water Temperature: °F (°C) |
|---|---|
| 1000-3240 | -4 (-20) |
| 22210-2690 | 68 (20) |
| 288-352 | 176 (80) |