LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1983 >> B2000 Base >> Repair and Diagnosis (Single Page) >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Wheel Alignment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wheel Alignment

WHEEL ALIGNMENT SPECIFICATIONS

Application Specification
B2000 & B2200 Pickups
Caster (Degrees) 1
Camber (Degrees) +1/3 to 1 1/4
Toe-in (Inches) 0 to 1/64
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
GLC
Caster (Degrees) (1) +2 +/- 2/3
Camber (Degrees) +1 +/- 1/2
Toe-in (Inches) (2) 0 +/- 1/8
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
GLC Wagon
Caster (Degrees) (1) +1 to 2 1/3
Camber (Degrees) (1) +1/4 to 1 1/4
Toe-in (Inches) 0 to 9/32
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
RX7
Caster (Degrees) (3) +3 2/3 +/- 1/2
Camber (Degrees) +1 +/- 1/2
Toe-in (Inches) 0 to 9/32
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
626
Caster (Degrees) +1 2/3 +/- 2/3
Camber (Degrees) +1/3 +/- 1/2
Toe-in (Inches) (4) +1/8 +/- 1/8
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
(1) Not adjustable.
(2) Same for rear.
(3) Left side only, right side specifications are 4 1/6 +/- 1/2.
(4) Rear specifications are 0 +/- 1/8.
scientia non olet · About LEMON Manuals