LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1983 >> B2000 Base >> Repair and Diagnosis >> Engine Performance >> System >> Deceleration Control System - Federal >> Component Testing >> Air By-Pass Valve
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Air By-Pass Valve

  1. Disconnect air by-pass valve-to-exhaust manifold hose from air by-pass valve. Start engine and run at idle. Place finger over air by-pass valve outlet and make sure air is escaping.
  2. Increase engine speed and quickly release accelerator. Air should stop flowing for a few seconds. If air does not flow out or air flow lasts for more than 3 seconds, replace air by-pass valve.
scientia non olet · About LEMON Manuals