LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1983 >> RX-7 GSL, Automatic >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Testing >> Igniter Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Igniter Check

  1. Remove ignitor from distributor base. Make a circuit as shown in Fig. Fig 1 using wire and a test bulb. Use a 12 volt bulb of less than 10 watts.
    Fig 1: Test Lamp Hookup For Checking Ignitor Operation. Bulbs Should Flash When Switch Is Operated.
    G29016
  2. Quickly operate switch "ON " and "OFF", and make sure test lamp flashes. If not, replace ignitor.
scientia non olet · About LEMON Manuals