LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1984 >> B2000 Base, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Wheel Alignment Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wheel Alignment Specifications

WHEEL ALIGNMENT SPECIFICATIONS (B2000 & B2200 PICKUP)

Application Specification
Caster (Degrees) 1
Camber (Degrees) +1/3 to 1 1/4
Toe-in (Inches) 0 to 1/8
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
WHEEL ALIGNMENT SPECIFICATIONS (GLC)

Application Specification
Caster (Degrees) +1 11/12 +/- 3/4
Camber (Degrees) +11/12 +/- 1/2
Toe-in (Inches) 0 +/- 1/8
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
WHEEL ALIGNMENT SPECIFICATIONS (RX7)

Application Specification
Caster (Degrees) +3 2/3 +/- 1/2 (1)
Camber (Degrees) +1 +/- 1/2 (2)
Toe-in (Inches) 0 to 1/4
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
(1) Left side only, right side specifications are 4 1/6 +/- 1/2.
(2) For 13" tires only, 14" tires specifications are 7/12 +/- 1/2.
WHEEL ALIGNMENT SPECIFICATIONS (626)

Application Specification
Caster (Degrees) +1 2/3 +/- 3/4
Camber (Degrees) +1/3 +/- 1/2
Toe-in (Inches) +1/8 +/- 1/8 (1)
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
(1) Rear specifications are 0 +/- 1/8.
scientia non olet · About LEMON Manuals