LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1985 >> 626 Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Feedback Carburetor System >> Testing >> Water THERMO Switches
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Water THERMO Switches

  1. Remove switch from lower left hand corner of radiator. Green/Black and Black wires are attached to the switch.
  2. Place switch in water with a thermometer and heat up water gradually. Check temperature at which continuity exists between both terminals of switch.
  3. The switch should show continuity at 59.4-66.6°F (15-19°C). Replace switch if it does not agree with standard value.
scientia non olet · About LEMON Manuals