LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1986 >> 323 Base >> Repair and Diagnosis >> Engine Performance >> System >> EFI Control System >> Testing & Diagnosis >> Diagnostic Procedure >> Code 3 (Coolant Thermo Sensor)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Code 3 (Coolant Thermo Sensor)

  1. Check for poor connections at coolant thermo sensor connector. Repair or replace as necessary. If connections are okay, check resistance of coolant thermo sensor. If resistance is within 94-73,800 ohms, go to next step. If not, replace coolant thermo sensor.
  2. Measure voltage at terminal "2I" of ECU. If reading is 12 volts, check for open circuit in wiring harness. If reading is zero volts, check for short circuit in wiring harness from coolant thermosensor to terminal "2I" of ECU connector. If short is not located, replace faulty ECU.
scientia non olet · About LEMON Manuals