LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1986 >> 626 Base >> Repair and Diagnosis >> Engine Performance >> System >> EFI Control System >> Testing >> Oxygen Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oxygen Sensor

  1. Warm engine to normal operating temperature and allow it to idle. Disconnect oxygen sensor wiring harness connector. Attach voltmeter between oxygen sensor and ground. Increase engine speed to 4000 RPM until voltmeter indicates about .7 volts.
  2. Increase and decrease engine speed quickly several times. When speed is increased, voltmeter reading should be between .5-1.0 volts. When engine speed is decreased, reading should be between 0-.4 volts. If readings are incorrect, replace oxygen sensor.
scientia non olet · About LEMON Manuals