LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1988 >> 323 GT >> Repair and Diagnosis >> Engine Performance >> System >> EGI Control System >> Diagnosis & Testing >> Component Testing >> Neutral Switch (M/T)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Neutral Switch (M/T)

  1. Disconnect 2-pin connector behind battery. Measure resistance between Brown/Black wire and ground. If resistance is zero ohms, use other side of connector.
  2. Place transaxle in neutral position. Resistance between Red/Blue wire and Brown/Black wire should be infinite.
  3. Place transaxle in any gear. Resistance between Red/Blue wire and Brown/Black wire should be zero ohms.
scientia non olet · About LEMON Manuals