LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1989 >> RX-7 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Basic Testing >> Fuel Pressure >> Fuel Injection Models >> Resistor Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Resistor Relay

  1. Remove air cleaner and airflow meter. Disconnect fuel pump resistor. Ensure continuity exists between terminals "a" and "b". See Fig 1 and Fig 2 .
  2. Measure resistance between the following terminals. Resistance between terminals "c" and "d" should be 60-92 ohms and between "e" and "f" should be .70-.94 ohms. If resistor relay does not test as specified, replace relay.
Fig 1: RX7 Fuel Pump Control Circuit
G117622Courtesy of MAZDA MOTOR CORP.
Fig 2: Testing RX7 Fuel Pump Resistor
G36015Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals