LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1990 >> 626 Base >> Repair and Diagnosis >> Body & Frame >> Power Windows >> System Tests >> Test A: All Windows Inoperative
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test A: All Windows Inoperative

  1. Turn ignition on. Check 30-amp power window fuse in fuse block, near left kick panel. If fuse is blown, replace fuse (repair wiring if necessary). If fuse is okay, go to next step.
  2. Check voltage at Black/Red wire terminal of main switch connector. If battery voltage is present, go to next step. If battery voltage is not present, repair Black/Red wire between fuse and main switch.
  3. Turn ignition off. Disconnect main switch connector. Check continuity between ground and Black wire terminal of main switch connector. If there is continuity, check power window main switch (driver's side). See MAIN SWITCH  under COMPONENT TESTS. If there is no continuity, repair the harness (switch to body ground).
scientia non olet · About LEMON Manuals