LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1990 >> 929 Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Carburetor >> Reassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel System: Carburetor: Reassembly

  1. To reassemble, reverse disassembly procedure using new gaskets. The "O" ring located on air/fuel solenoid valve must be replaced and coated with gasoline prior to installation.
  2. Check float level and float drop adjustment prior to installing air horn. Perform all adjustments after assembly. See CARBURETOR ADJUSTMENTS in this article. DO NOT install spring pin in front of mixture screw until adjustment has been made with engine running.
scientia non olet · About LEMON Manuals