Camber Adjustment: 929

Raise and support front of vehicle. Remove upper strut-to-body nuts. Push strut mounting block downward, and turn to desired position. Reinstall and tighten nuts. See Fig 1.

Fig 1: Adjusting Camber & Caster (MPV, MX-6, RX7, 626 & 929) Courtesy of Mazda Motors Corp.

Fig 2: Adjusting Camber & Caster (Navajo) Courtesy of Mazda Motors Corp.

Fig 3: Camber/Caster Adjuster Selection Chart (Navajo) Courtesy of Mazda Motors Corp.

Fig 4: Adjusting Camber & Caster (Protege & 323) Courtesy of Mazda Motors Corp.